Share this article
Improve this guide
Sabrent SATA to USB not Working: 3 Methods to Make it Show up
Updating your USB driver should do the trick here
4 min. read
Updated onApril 4, 2024
updated onApril 4, 2024
Share this article
Improve this guide
Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more
Key notes
Many people report that theirexternal drivesdon’t work on Windows 10 when using a Sabrent USB 3.0 to SATA/IDE adapter.
While this issue can be due to various factors, it is not the most difficult to fix, as shown in this guide.
Why is my USB SATA drive not detected?
Listed below are some of the prevalent causes of the Sabrent SATA to USB not working issue:
What can I do if Sabrent SATA to USB is not working?
Below are some preliminary troubleshooting steps to try before exploring sophisticated solutions:
1. Check the drive connection
One of the most common causes of the Sabrent USB 3.0 SATA HDD docking station not working is a bad physical connection.
To rule out this cause, it’s recommended to check if the USB port or the USB cable function as it should.
Check the USB cable and also search for a light indicator that will let you know the hard drive is working,
Additionally, you can check and see if the USB port on yourcomputeris not by any chance damaged by unplugging the drive and using it on a different device or port on the same PC.
2. Update the driver
The Sabrent SATA to USB not working issue can sometimes be caused by an outdated or incompatible driver. To fix this, you should use the default drivers that came with your PC.
To make things easier, however, we recommend using a third-party driver updater such asPC HelpSoft Driver Updater.
Using this driver manager tool, you can access the online database containing thousands of authorized drivers ready to be installed for your devices.
It would be best if you thus benefited from this automated support to update, install, or fix any drivers with their latest versions in no time.
⇒Get PC HelpSoft Driver Updater
3. Use Sabrent’s power supply
If the above steps did not help you solve the problem, we recommend you use the power supply module that came with the Sabrent unit.
The HDD you’ve prepared may have more power than can be supplied by a USB3 port. However, a USB3 port can only supply up to 0.9 amps.
It is usually indicated that an HDD needs 1 amp to start up and over 2 amps for reading and writing, which could be why you should use the power supply unit Sabrent came with.
That is all you should do to fix the Sabrent SATA to USB adapter not working issue. If you need a list of thebest USB 3.0 external hard drive enclosuresyou can use, check our carefully-curated picks.
In the comments below, let us know the solution that helped you fix this issue.
More about the topics:External HDD,USB issues
Vladimir Popescu
Being an artist his entire life while also playing handball at a professional level, Vladimir has also developed a passion for all things computer-related.
With an innate fascination for research and analysis, and realizing many other people share his passion for this subject, he delved into writing Windows-related articles, so other people can also benefit from the acquired information.
When not writing kick-ass articles, Vladimir likes to spend his time doing Crossfit and creating art.
User forum
0 messages
Sort by:LatestOldestMost Votes
Comment*
Name*
Email*
Commenting as.Not you?
Save information for future comments
Comment
Δ
Vladimir Popescu
