Share this article

Improve this guide

FULL FIX: KERNEL STACK INPAGE_ERROR in Windows 10

9 min. read

Updated onAugust 7, 2024

updated onAugust 7, 2024

Share this article

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

Key notes

To fix various driver issues on your PC, you will need a dedicated tool to find the freshest and the original drivers. You can use PC HelpSoft Driver Updater to do it in 3 easy steps:

BSoDerrors, such as KERNEL_STACK_INPAGE_ERROR, can be a big problem since they will crashWindows 10and restart your computer.

Theseerrorscan be problematic, therefore today we going to show you how to fix KERNEL_STACK_INPAGE_ERROR error.

How can I fix KERNEL STACK INPAGE ERROR BSoD error?

Table of contents:

Fix – KERNEL STACK INPAGE ERROR Windows 10 error

1. UpdateWindows 10

ManyBlue Screen of Deatherrors are caused by hardware and software issues.

For example, if certain hardware or software isn’t fully compatible withWindows 10, that can causeBSoDerror such as KERNEL_STACK_INPAGE_ERROR to appear.

The easiest way to prevent theseerrorsfrom appearing is to useWindows Updateand download the latest patches.

Many of these patches improve system security, but at the same time, they also fix many hardware and software issues, therefore, be sure to download them as often as you can.

2. Update your drivers

In order forWindows 10to recognize and use certain hardware, it’s important that you keep your drivers up to date.

Updating drivers make sure thatWindows 10can successfully recognize and use certain hardware.

And if the driver is outdated, corrupted, or just not compatible withWindows 10, you’ll get a KERNEL_STACK_INPAGE_ERRORBSoDerror and your computer will restart.

To prevent these types of problems, it’s crucial to keep all drivers up to date, and you can do that right from the Device Manager by following these steps:

Updating your drivers via Device Manager is simple and straightforward, but it might not be the best solution.

According to users, sometimes Device Manager cannot find and download the latest drivers, therefore if you want to use the latest drivers, you might have to download them manually.

Downloading drivers manually is fairly simple, and in order to do that, you just need to visit your hardware manufacturer’s website, locate your device and download the latest drivers for it.

Keep in mind that you’ll need to find and download drivers for all major hardware components.

2.1 Update drivers automatically

Searching for drivers on your own can be time-consuming. So, we advise you to use a tool that will do this for you automatically.

Advanced software will help you update drivers automatically and prevent PC damage caused by installing the wrong driver versions.

Plus, managing your drivers with dedicated tools involves optimizing your PC performance with improved functionality of your devices.

In case you want a reliable service that prevents you from system malfunctions or crash errors, the software below is exactly what you need.

⇒Get PC HelpSoft Driver Updater

3. Run theBSODTroubleshooter

If updating your system and drivers didn’t resolve the problem, let’s tryWindows 10‘s built-in troubleshooting tool.

This tool can help with resolving all sorts of issues, including theBSODproblems, like the KERNEL_STACK_INPAGE_ERROR error.

Here’s how to run theBSODtroubleshooter inWindows 10:

4. Run the SFC scan

The next troubleshooting tool we’re going to try is the SFC scan. This tool scans your computer through the Command Prompt, in search of potential problems.

If the solution is possible, the SFC scan will automatically resolve it.

Here’s how to run the SFC scan inWindows 10:

5. Run DISM

Deployment Image Servicing and Management tool is another command-line troubleshooter.

But unlike the previous two, this one completely re-deploys the system image, which can lead to resolving various problems. Including the KERNEL_STACK_INPAGE_ERROR error (hopefully).

We’ll walk you through both standard and the procedure that utilizes the installation media below:

6. Check the hard drive

BSODissues are quite common when there’s something wrong with your hard drive. So, we’re going to check your hard drive for potential problems.

To do that, you need to run the chkdsk command, which will scan all your partitions, and resolve potential problems, if possible.

Here’s how to check the hard drive inWindows 10:

This is just our example, so keep in mind that you have to perform chkdsk command for every hard drive partition that you have.

7. Check/Uninstall your antivirus

Certain software can also be the cause for KERNEL_STACK_INPAGE_ERRORBSoDerror.

Sometimes your antivirus software can cause this problem, so in order to fix it, it’s advised that you completely remove your antivirus.

In order to completely remove an antivirus program, it’s recommended that you use a dedicated removal tool.

To perform this action correctly and fully uninstall your antivirus program it’s needed to employthe most efficient uninstaller software.

Many security companies offer these tools for their software, and you can download them for free.

According to users, the KERNEL_STACK_INPAGE_ERRORerrorappears while trying to perform a virus scan using Malwarebytes.

However, to avoid this incompatibility with your antivirus, it’s advised to use thebest antivirus software for Windows 10.

8. Change hard drive mode from AHCI to ATA

According to users, the KERNEL_STACK_INPAGE_ERROR BSoDerrorcan be caused if yourhard drivemode isn’t properly set.

Users reported that switching their hard drive mode fromAHCItoATAfixed thiserrorfor them, so you might want to try that.

To switch your hard drive mode, you need to enter BIOS and change this setting.

For detailed instructions on how to do that, we strongly advise you to check yourmotherboardmanual for detailed instructions.

9. Check your hardware

Several users reported that the KERNEL_STACK_INPAGE_ERRORerrorwas caused by a hardware problem, mostly related to the hard drive.

To fix this problem, be sure to check if your SATA port is working properly.

Users reported that after connecting their hard drives to a different SATA port on their motherboard, theerrorwas completely resolved.

In addition, be sure to check for any loose connections.

Apparently, thiserrorcan be caused if the power cable isn’t properly connected to your hard drive, therefore you need to check if the power cable is firmly connected to your hard drive.

In addition to the power cable, sometimes a faulty SATA cable can cause thiserror, and users reported that the issue was fixed after replacing the SATA cable.

It’s worth mentioning that almost any other hardware component can cause thiserror, so make sure that you check your RAM first since it’s the common culprit for these types oferrors.

To check your RAM, you need to test RAM modules one by one until you find the one that is faulty.

In addition, you can also use MemTest86+ to perform a detailed scan of your RAM. If your RAM is working properly, be sure to check all other hardware components.

KERNEL_STACK_INPAGE_ERROR is often caused by a minor hardware problem, such as a loose cable, but before you start checking your hardware, be sure to try a few other solutions from this article.

FULL FIX: KERNEL STACK INPAGE_ERROR in Windows 10#

How can I fix KERNEL STACK INPAGE ERROR BSoD error?#

Fix – KERNEL STACK INPAGE ERROR Windows 10 error#

1. UpdateWindows 10#

2. Update your drivers#

3. Run theBSODTroubleshooter#

4. Run the SFC scan#

5. Run DISM#

6. Check the hard drive#

7. Check/Uninstall your antivirus#

8. Change hard drive mode from AHCI to ATA#

9. Check your hardware#