Share this article

Improve this guide

Fix: Windows 10 can’t Connect to router

5 min. read

Updated onAugust 2, 2024

updated onAugust 2, 2024

Share this article

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

To fix various driver issues on your PC, you will need a dedicated tool to find the freshest and the original drivers. You can use PC HelpSoft Driver Updater to do it in 3 easy steps:

If you wish to make any network-related changes, for example, change your WiFi password, you have to connect to your router. A couple of users reported thatWindows 10can’t connect to their router, and if you are having the same problem, you should try a few of our solutions.

Windows 10 can’t connect to my router

Table of contents:

Fix –Windows 10can’t connect to WiFi network

1. Restart your router

Sometimes the simplest solution is the best one, and in most cases router problems can be fixed by restarting your router. To restart your router press the power button to turn off your router. Wait for 30 seconds and turn your router back on. If the problem persists, move to the next solution.

2. Update your network drivers

IfWindows 10can’t connect to your router, make sure that you’re using the latest network drivers. To update your network drivers, visit your network card manufacturer’s website, locate your network adapter and download the latest drivers for it. If you’re using a built-in Ethernet adapter, visit yourmotherboardmanufacturer’s website in order to download the latest drivers.

2.1 Update drivers automatically

To avoid damaging the PC by installing bad driver versions, we strongly suggest that you do so automatically using third-party software.

This type of tool will assist you in safely updating all out-of-date drivers. After you select the drivers to update the software will do all the work on your behalf automatically.

⇒Get PC HelpSoft Driver Updater

3 Reinstall network drivers

Sometimes it’s better to resolve network problems simply by reinstalling network drivers. In order to reinstall default network drivers, you need to do the following:

In addition, you can use Windows Update to update the missing drivers. To do that, follow these steps:

4. Check if you’re using the correct address

You might be unable to connect to your router if you’re using the wrongIP address. To check for correctIP addressdo the following:

5. Try using a different web browser

Few users reported that they cannot connect to router inWindows 10when using a specific browser. If that’s the case, we urge you to try connecting to your router from a different browser or from a different device, such as your smartphone, tablet, or an other computer in your network.

6. Reset your router

Most routers come with a reset button that will restore them to factory settings. If you can’t access your router inWindows 10, it might be due to changed router settings and the only solution is to reset it. In order to reset your router, you need to press and hold the Reset button for a few seconds, but before you perform a reset be sure to check your router manual.

7. Update router firmware

If the problem persists, you might have to update router firmware. This is an advanced solution, and if not careful you can causepermanentdamage to your router. Before updating your router’s firmware make sure to thoroughly check the instruction manual in order to avoid causing any potential damage.

8. Run the Network Troubleshooter

If none of the previous solutions resolved the issue, we’re going to tryWindows 10‘s built-in troubleshooting tool. Here’s how to run it:

9. Use the Command Prompt

And finally, the final thing we’re going to try is resetting winsock and flushing DNS. Here’s what you need to do:

Being unable to access your router can be a big problem, especially because you can’t change any of the router settings. If you have any issues with connecting to your router, feel free to try some of our solutions.

Fix: Windows 10 can’t Connect to router#

Windows 10 can’t connect to my router#

1. Restart your router#

2. Update your network drivers#

3 Reinstall network drivers#

4. Check if you’re using the correct address#

5. Try using a different web browser#

6. Reset your router#

7. Update router firmware#

8. Run the Network Troubleshooter#

9. Use the Command Prompt#