FIX: BIOS Recognizes SSD But Won’t Boot [2024 Guide]

Did you try resetting the BIOS or enabling the legacy boot?

4 min. read

Updated onMay 17, 2024

updated onMay 17, 2024

Share this article

This article is translated in

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

SSDs are great since they offer better performance, but many users reported that BIOS recognizes SSD, butPC won’t bootfrom it.

This can be a big problem, especially if you purchased a new SSD to replace your hard drive. The good news is that it’s fixable. In today’s article, we’ll walk you through all you ned to do.

What do I do if BIOS recognizes SSD but won’t boot?

1. Check the boot prioirity order

If yourPC ignores boot order, consider checking if the boot media is working or removing the CMOS battery.

2. Change boot mode

The exact location of theBoot settingsdepends on your device. To be sure, check your motherboard manual for detailed instructions.

3. Update BIOS

Keep in mind that the BIOS update is an advanced procedure that can damage your motherboard, so be sure to follow the instructions from the motherboard manual in order to avoid damaging your motherboard.

4. Reset BIOS to default

5. Unplug all SATA devices except for the one connected to SSD

Removing allSATA cablesbesides the SSD may force your computer to recognize it as the primary boot device. The PC should start properly as no other device will interfere with the boot process.

6. Reset Windows

We recommend this option because it gives you the possibility to keep your files. However, if the SSD not booting issue persists, consider backing up your files and performing aclean install.

7. Remove the System Reserved partition from the other drive

This issue occurs if you have boot files on both your SSD and hard drive, and by formatting the drive, you might be able to fix the problem.

Not being able to use your new SSD can be a problem, but we hope that after reading this article you managed to fix all SSD booting issues on your PC.

For more suggestions or other questions regarding this topic, please access the comments section below.

FIX: BIOS Recognizes SSD But Won’t Boot [2024 Guide]#

What do I do if BIOS recognizes SSD but won’t boot?#

1. Check the boot prioirity order#

2. Change boot mode#

3. Update BIOS#

4. Reset BIOS to default#

5. Unplug all SATA devices except for the one connected to SSD#

6. Reset Windows#

7. Remove the System Reserved partition from the other drive#