Share this article

Improve this guide

Fix: 0xc1900200 error in Windows 10

6 min. read

Updated onAugust 1, 2024

updated onAugust 1, 2024

Share this article

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

To fix various driver issues on your PC, you will need a dedicated tool to find the freshest and the original drivers. You can use PC HelpSoft Driver Updater to do it in 3 easy steps:

Free upgrade period is coming to an end, and if you want to upgrade toWindows 10this is your last chance because free upgrade ends on July 29. Unfortunately,Windows 10upgrade can sometimes encounter problems and one of the most common problems is error 0xc1900200.

How to fix 0xc1900200 error on Windows 10?

Table of contents:

Solution 1 – Use a third-party repairing tool

A simpler way to repair corrupted files and get rid of system errors is to use adedicated repair toolthat can do all the work for you. The software will automatically scan your PC for problematic files and act accordingly.

Solution 2 – Disconnect all USB devices

Sometimes you might get a 0xc1900200errorduringWindows 10upgrade if you have your externalhard driveconnected. External hard drives are extremely useful for file backup, but if you have your external driver connected during theWindows 10upgrade process you might encounter certainerrors, therefore it’s highly recommended that you disconnect it.

Users also reported the sameerrorwith aUSBBluetoothreceiver for thewireless mouse. According to them, the issue was completely fixed after disconnecting the receiver from the PC. Bear in mind that almost any USB device can cause thiserrorto appear, so be sure to disconnect all the unnecessary USB devices such as yourprinter,controller, etc. before startingWindows 10upgrade process.

Solution 3 – Reset theWindows 10Update components

Another thing you can do if you can’t install the upgrade is resetting theWindows 10Update components. If you’re not sure which components exactly, just follow these instructions:

Now, you should rename the SoftwareDistribution and Catroot2 folder. Here’s how to do that:

Solution 4 – Check if your PC matches the requirements

Windows 10isn’t a demanding operating system, but in order to upgrade you need to make sure that your PC matches its requirements. If your computer matches the hardware requirements, it quite possible that a certain application, driver, or firmware is preventing theWindows 10upgrade, so be sure to update your drivers and check if everything is up to date. In addition, make sure that you have the latestWindows updatesinstalled.

Updating drivers is crucial for your system’s stability and safety, and to quickly update all your drivers, we suggest you try this professional driver update software that does it all automatically.

⇒Get PC HelpSoft Driver Updater

Solution 5 –Run SFC scan

Now, let’s turn to the troubleshooting tools. If there’s something inside your system that needs tweaking, and therefore prevents you from upgrading it, the SFC scan could be a perfect solution. Here’s how to run the SFC scan:

Solution 6 –Whitelist the Windows Update servers

Maybe you’re unable to receive the upgrade because your computer is set to block Microsoft’s update servers. Here’s how to unblock them:

Solution 7 –Run DISM

And the last troubleshooting tool w’re going to try is DISM. DISM is basically same as the SFC scan, but is more powerful, so if the SFC scan didn’t get the job done, chances are, DISM will.

Here’s how to run DISM in Windows 7/8:

Solution 8 – Change the size of the reserved partition

Sometimes you won’t be able to upgrade toWindows 10due to the size of the reservedpartition. To fix this issue you have to expand its size, and the simplest way to do that is to use a third-party tool such as MiniTool Partition Wizard Free. Once you install the application increase the size of your reserved partition from 300MB to 1GB for example. If necessary, you might have to reduce the size of other partitions on your hard drive. Bear in mind that this procedure can be potentially dangerous, because you might accidentally delete a certain partition if you’re not careful, therefore extra caution is advised.

Solution 9 – Update your BIOS

Few users reported that they are unable to upgrade toWindows 10due to theirBIOS. According to them, their CPU clock was incorrect, and that was the cause for the 0xc1900200 error. After updating the BIOS, the issue was fixed andWindows 10upgrade was installed without any problems. We have to mention that this issue can occur even if you have the latest version of BIOS installed, so you might have to install it again just to fix thiserror. Bear in mind that BIOS upgrade is somewhat an advanced procedure, therefore if you don’t know how to perform it properly, we strongly suggest that you check your motherboard manual for detailed instructions. BIOS upgrade can cause permanent damage if the upgrade process goes wrong, therefore be extra cautious if you decide to upgrade BIOS.

Error0xc1900200 can prevent you from upgrading toWindows 10, and if you’re having thiserrorbe sure to try some of our solutions.

Fix: 0xc1900200 error in Windows 10#

How to fix 0xc1900200 error on Windows 10?#

Solution 1 – Use a third-party repairing tool#

Solution 2 – Disconnect all USB devices#

Solution 3 – Reset theWindows 10Update components#

Solution 4 – Check if your PC matches the requirements#

Solution 5 –Run SFC scan#

Solution 6 –Whitelist the Windows Update servers#

Solution 7 –Run DISM#

Solution 8 – Change the size of the reserved partition#

Solution 9 – Update your BIOS#