Share this article

Improve this guide

CONFIG LIST FAILED error on Windows PCs [FULL FIX]

8 min. read

Updated onAugust 6, 2024

updated onAugust 6, 2024

Share this article

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

Key notes

To fix various driver issues on your PC, you will need a dedicated tool to find the freshest and the original drivers. You can use PC HelpSoft Driver Updater to do it in 3 easy steps:

Although computer errors are relatively common and harmless, certain errors such as CONFIG LIST FAILED BSoD error can be a major problem onWindows 10.

These types of errors can be rather troublesome, therefore it’s crucial that you know how to fix them. We have prepared the most efficient solutions, so read the next section.

How can I fix CONFIG LIST FAILED BSoD error?

1. KeepWindows 10up to date

Blue Screen of Death errors can be caused by faulty hardware or a certain software that isn’t fully compatible withWindows 10.

Therefore sometimes it can be hard to find and fix the cause of CONFIG LIST FAILED error.

In order to avoid getting BSoD errors, it’s important to download and install the latestWindows 10updates.

By usingWindows Updateyou’ll download the latest security patches, and many of these patches will also fix various hardware and software issues.

By installing the latest patches, you’ll make sure that your computer is stable and safe from BSoD errors.

2. Update yourdrivers

Driversare an integral part of every operating system since they allow your PC to recognize and use your hardware.

If a certaindriverisn’t compatible withWindows 10, you’ll encounter a BSoD error such as CONFIG LIST FAILED and your computer will crash.

Fortunately, updatingdriversis rather simple, and in order to do it, you just need to visit your hardware manufacturer’s website, locate your device and download the latestdriversfor it.

Bear in mind that in order to fix the CONFIG LIST FAILED error, you’ll have to update all major components.

Searching fordriverson your own can be time-consuming. So, we advise you to use a tool that will do this for you automatically. Download, install and set it to scan your operating system.

This software detects all outdated, missing, or damaged drivers from your computer. Once the scanning is done, you receive a detailed report with all your drivers.

In addition, the tool allows you to create a backup for the updated drivers, and ensure the restore point in case you encounter some issues.

The last step you have to take is to choose what are the drivers you wish to download and install usingPC HelpSoft Driver Updater.

3. Run the BSOD Troubleshooter

The next thing we’re going to try is running Windows 10’s built-introubleshooter. This tool can be used for addressing all kinds of different problems, including BSOD issues.

So, it could also resolve the CONFIG LIST FAILED error.

4. Run the SFC scan

Another troubleshooting tool we’re going to try here is the SFC scan.

The system file checker is a command-line tool that basically scans through your system searching for potential issues.

If a corrupted system file is a problem, this tool will automatically repair it, and the problem will be resolved.

5. Run DISM

And the third troubleshooting tool we’re going to try is DISM. Deployment Image Servicing and Management (DISM) is a tool that re-deploys the system image and resolves potential issues along the way.

So, it could be helpful when addressing the CONFIG_LIST_FAILED error, as well.

We’ll walk you through both standard and the procedure that utilizes the installation media.

So, it could be helpful when addressing the CONFIG_LIST_FAILED error, as well.

We have shown you both procedures: standard and the one that utilizes the installation media.

6. Run chkdsk

If you cannot accessWindows 10due to CONFIG LIST FAILED error, you can run the chkdsk by following these steps:

BSoD errors can be caused by corrupted files on yourhard drive.

In order to fix this issue, it’s advised to runchkdskscan. To run a chkdsk scan, you need to apply this solution.

7. Uninstall problematic software

Certain software can cause a CONFIG_LIST_FAILED error to appear, and in order to fix it, you’ll need to find and remove the problematic software.

If you installed or updated any new software recently, be sure to remove it and check if that fixes the problem.

Another common cause for BSoD errors can be your antivirus, therefore it’s advised to remove any third-partyantivirus programsand leave only Windows Defender.

It’s worth mentioning that when you uninstall an antivirus, it can sometimes leave certain files and registry entries, and it’s crucial to remove them as well.

Many antivirus companies have dedicated uninstaller tools for their software, so be sure to download one of these tools and use it to completely remove your antivirus program.

8. Change your hard drive mode from AHCI to ATA

According to users, CONFIG LIST FAILED can appear if your hard drive mode is set to AHCI. In order to fix this error, you need to enter BIOS and change it just like we have shown above.

9. Run Automatic Repair / ResetWindows 10

If the problem still persists, you might want to perform Automatic Repair.

If Automatic Repair doesn’t fix the problem, you might have to perform a Windows 10 reset.

By performingWindows 10reset you’ll delete all files from your C drive, so be sure to back them up. After you create your backup, do the following:

When the reset process is completed, you’ll have a freshly installedWindows 10without any applications that can cause the BSOD error.

If the problem still persists, it means that it’s caused by your hardware.

10. Check your hardware

A relatively common cause for CONFIG LIST FAILED BSOD error can be your hardware, so be sure that your hardware is working properly.

A most common cause can be your RAM, but almost any major component can cause this error to appear.

In addition, if you installed any new hardware recently, be sure to remove it or replace it, since it might not be fully compatible with your PC.

CONFIG LIST FAILED BSoD error can be problematic, but users reported that they managed to fix the error by updating theirdriversor by changing the hard drive mode.

If these solutions don’t work for you, feel free to try other solutions from this article.

CONFIG LIST FAILED error on Windows PCs [FULL FIX]#

How can I fix CONFIG LIST FAILED BSoD error?#

1. KeepWindows 10up to date#

2. Update yourdrivers#

3. Run the BSOD Troubleshooter#

4. Run the SFC scan#

5. Run DISM#

6. Run chkdsk#

7. Uninstall problematic software#

8. Change your hard drive mode from AHCI to ATA#

9. Run Automatic Repair / ResetWindows 10#

10. Check your hardware#